Export · Singapore · ASEAN

Two-Component Polyurethane Matte Topcoat for Singapore — System Finish by Shunfengshan

DuraGuard 2K Topcoat is a two-component polyurethane matte protective finish designed as the final coat for artistic paint, micro-cement, and mineral wall systems — not as a generic floor-only SKU.

What is a 2K PU matte topcoat?

A two-component (2K) polyurethane matte topcoat is mixed on site (Part A + Part B hardener) before application. In Singapore, it seals artistic textured walls, micro-cement surfaces, and high-traffic commercial interiors where higher scrub resistance and hardness are required than typical waterborne silicone-acrylic clear coats.

Shunfengshan Artistic Coatings (Zhan Shibo Environmental Technology Co., Ltd.) is a Foshan-based manufacturer of decorative wall coating systems. We supply DuraGuard 2K as the system finish for Velvet Cloud Finish, Mineral Crystal Inorganic Coat, Minimal Microcement Coat, and related lines exported to Singapore and ASEAN.

≥2HPencil hardness
≥5,000Scrub cycles
8–12m²/kg per coat
5–35°CApplication temp.

DuraGuard 2K — Technical summary

ParameterValueNotes
Product nameDuraGuard 2K Topcoat双组分钻护罩面剂
ChemistryTwo-component polyurethaneMix A + B; use within pot life
FinishMatte / low sheenLow dirt pick-up vs gloss
Hardness≥2HPencil hardness test
Scrub resistance≥5,000 cyclesHigh-traffic commercial zones
Coverage8–12 m²/kg per coatThin, even coats; avoid runs
Recoating≥2 h between coatsSubject to T & RH
Substrate moisture≤10%Verify before application
Packing5 kg / 20 kgOEM packs available

Mix Part A and Part B at the specified ratio; stir 2–5 minutes at low speed; apply by roller or spray in 1–2 thin coats. Do not exceed wet film thickness per coat.

Recommended coating system (Singapore projects)

Export as a full system — topcoat performance depends on primer and texture layers.

Substrate prep & primerArt coat / texture (e.g. Velvet Cloud, Microcement)DuraGuard 2K matte topcoat
Compatible Shunfengshan linesTypical use in Singapore
Velvet Cloud Finish Art PaintPremium residential & retail feature walls
Minimal Microcement CoatModern / wabi-sabi seamless interiors
Mineral Crystal Inorganic CoatHigh eco & durability commercial zones
Limestone Mineral Texture CoatDesigner & boutique hospitality

Singapore market context

Singapore imported approximately USD 161.46 million of non-aqueous paints and varnishes (HS 320890) in 2024, about 34.77 million kg — a regional trade hub for construction and industrial coatings.

China supplied roughly 10.4% by value in 2024 (USD 16.78M), with import volume from China up about 25% year-on-year. Malaysia remains the largest source (~54% by value).

Source: WITS / UN Comtrade HS 320890

Import & compliance

  • Customs duty: Singapore is generally a free port; HS 320890 coatings are typically not subject to general import duty — confirm AHTN code with your importer.
  • HS code: Non-aqueous 2K PU topcoats are commonly classified under 320890; waterborne systems may differ (e.g. 320990).
  • NEA (from 1 Jan 2026): Interior paints sold in Singapore must contain <0.01% w/w in-can formaldehyde, with accredited lab reports.
  • Documentation: English SDS, labels, VOC data (ISO 11890 where required), compatibility mock-up report.

NEA: No formaldehyde in interior paints from 2026

When to choose 2K PU matte vs waterborne clear coat

FactorWaterborne clear (e.g. silicone-acrylic)DuraGuard 2K PU matte
Scrub / wearGood for light residentialHigher cycles for lobbies & retail
ApplicationSimpler 1K workflow2K mix; trained applicator
Interior NEA 2026Common in SG texture systemsInterior SKU needs formaldehyde test
Best fitStandard feature wallsSystem finish over Shunfengshan art coats

We do not position DuraGuard 2K as a direct replacement for industrial floor systems (e.g. Sika ComfortFloor). Our focus is decorative wall system protection and OEM supply to distributors and applicators in Singapore.

Frequently asked questions

What is a two-component polyurethane matte topcoat used for in Singapore?

It protects artistic textured walls, micro-cement, and mineral coatings in commercial and premium residential projects. Shunfengshan uses DuraGuard 2K as the final coat in exported systems.

Is there import duty on PU topcoats in Singapore?

Generally no customs duty on HS 320890 as a free port. Confirm classification via Singapore Customs HS/CA Product Code Checker.

How do you verify compatibility before bulk export?

1 sqm mock-up on the actual substrate → colour/texture approval → compatibility and scrub check → bulk shipment.

Do you offer OEM / private label for Singapore distributors?

Yes. In-house manufacturing in Shunde, Foshan; flexible MOQ; English SDS and technical support for Singapore importers.

Request mock-up panel or OEM enquiry

For Singapore and ASEAN projects, contact our export team with your substrate type, system layers, and target performance. We provide 1 sqm panels for sign-off before bulk export.

Email export team B2B inquiry form 中文联系表单